28 Segment Ramp LCD Controller For Annealing Ovens
SKU: 28SG-RMP-LCD-CNTR
VENDOR: Thinglab
28 Segment Ramp LCD Controller For Annealing Ovens
28 segment ramp LCD controller with RS485 and USB interfaces for FAANO Annealing ovens with LCD panel for precise low temperature operations. Range from ambient to 400C and display temperatures in either Fahrenheit or Celsius.
Specifications
|
Electrical requirements |
220-240V single phase |
|
Temperature range |
0 to 400°C |
|
Unit dimensions |
95 x 95 x 65 mm (WxHxD) |
|
Shipping dimensions |
150 x 150 x 150 mm (WxDxH) |
|
Temperature accuracy |
+/- 1°C |
|
Temperature controller resolution |
0.1°C |
|
Dwelling timer range |
0 to 9999 minutes (0 means no timing) |
|
Dwelling timer unit |
Minute or hour |
|
Built-in calibration |
Yes |
|
PID control |
Yes |
|
Temperature display mode |
Fahrenheit or Celsius |
|
Shipping weight |
0.5 KG |
|
Compatible vacuum ovens |
FAAO-013L, FAAO-026L, FAAO-040L |
Note: If you intend to use your oven at temperatures higher than 100C, please perform an Auto-Tune (see oven manual) for faster heating rate.
Related products
SKU: FH-FCU-01
AVAILABILITY: In stock (2 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Fast Cure is a powerful and high-performance curing unit designed to cure dental parts in one to six minutes. Post-curing maximizes material properties for stereolithography prints, improving parts’ performance and achieving biocompatibility. Formlabs Dental resins have been rigorously validated and fine-tuned...
SKU: FHL-CU-230V-01
AVAILABILITY: In stock (0 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Large Format Post-Curing Post-curing SLA 3D printed parts helps them reach their maximum mechanical properties and achieve peak dimensional accuracy. Form Cure L (Generation 1) uses two 500W heaters and high-powered UV lights alongside a reflective inner cavity and rotating...
SKU: FT-F3-01
AVAILABILITY: In stock (-3 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Bring SLA parts to the next level with Formlabs Finishing Tools: a curated set of post-processing solutions for SLA 3D printing that streamlines every step in the workflow from part and support removal to sanding, buffing, and polishing. Bring SLA...
SKU: M/RA-3764-20C
AVAILABILITY: Out of Stock
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Resinaway
RESINAWAY cleaner is chemically engineered to quickly & effectively remove uncured UV photopolymer resin from printed parts, build plates, vats and instruments. Use this cleaning agent as is, do not dilute with water. For best results use in conjunction with...
SKU: SLV-CR-01
AVAILABILITY: In stock (-1 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
The Ceramic Wash Solution is a specialized wash liquid for cleaning your ceramic 3D printed parts. A wash in this solution is required for parts printed in Alumina 4N Resin.Ceramic Wash Solution is non-hazardous and non-flammable. 5 Liter container
