Formlabs Resin Washing Solution (5 L)
SKU: SLN-RW-01
VENDOR: Formlabs
Pickup available at 7A Kent Street, Yarraville, VIC.
Usually ready in 4 hours if in stock
Formlabs Resin Washing Solution (5 L)
Default Title
7A Kent Street, Yarraville, VIC
7A Kent Street
Yarraville VIC 3013
Australia
03 9687 8638
Clear Resin 3D Prints Efficiently and Safely
Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.
Formlabs Resin Washing Solution is recommended with the Form Wash (2nd Generation) and Form Wash L.
Why Choose Formlabs Resin Washing Solution
Stable and Cost-Effective
Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash.
Validated Non-Flammable
Non-flammable per GHS classification, mitigating storage and EH&S concerns.
Longer Solution Lifetime
Twice the longevity of IPA and minimal evaporation, leading to less frequent top-offs and full changeouts of washing solution.
Simplified Sourcing
You can get your resins and washing solution all in one place.
Compatibility
Formlabs Resin Washing solution is compatible with most non-biocompatible Formlabs Resins.
| General Purpose | Engineering | Casting | Dental |
|---|---|---|---|
| Clear Resin | Tough 2000 Resin | Castable Wax 40 Resin | Precision Model Resin |
| Grey Resin | Tough 1500 Resin | Clear Cast Resin | Model Resin |
| White Resin | Rigid 10K Resin | ||
| Black Resin | Rigid 4000 Resin | ||
| Fast Model Resin | Durable Resin | ||
| Draft Resin | High Temp Resin | ||
| Grey Pro Resin | ESD Resin |
Formlabs Resin Washing solution is not compatible with the Flexible and Elastic Resin family, or resins that require a validated workflow (biocompatible resin, Flame Retardant Resin, etc.).
*Based on GHS Classification
Related products
SKU: FH-FCU-01
AVAILABILITY: In stock (2 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Fast Cure is a powerful and high-performance curing unit designed to cure dental parts in one to six minutes. Post-curing maximizes material properties for stereolithography prints, improving parts’ performance and achieving biocompatibility. Formlabs Dental resins have been rigorously validated and fine-tuned...
SKU: FHL-CU-230V-01
AVAILABILITY: In stock (0 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Post-curing SLA 3D printed parts helps them reach their maximum mechanical properties and achieve peak dimensional accuracy. Form Cure L uses two 500W heaters and high-powered UV lights alongside a reflective inner cavity and rotating turntable to provide a consistent,...
SKU: FHL-WA-01
AVAILABILITY: In stock (0 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
All SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time. Once washing completes, parts are lifted out of the solvent to air dry, avoiding...
SKU: FH-CU-01
AVAILABILITY: In stock (1 item)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Unlock Peak Performance. Post-curing maximizes material properties for stereolithography prints, improving parts strength and performance. Form Cure precisely combines heat and 405 nm light to consistently post-cure prints. Form Cure is designed for curing parts printed on the Form 3...
SKU: FT-F3-01
AVAILABILITY: In stock (-3 items)
PRODUCT TYPE: 3D Print Post-Processing
VENDOR: Formlabs
Bring SLA parts to the next level with Formlabs Finishing Tools: a curated set of post-processing solutions for SLA 3D printing that streamlines every step in the workflow from part and support removal to sanding, buffing, and polishing. Bring SLA...
