Out stock

Formlabs Fuse Blast

Achieve professional, consistent parts that are clean to the touch faster and easier than ever before with Fuse Blast, an easy-to-use, fully automated cleaning and polishing solution for post-processing SLS 3D printed parts.



VENDOR: Formlabs

Pickup available at 7A Kent Street, Yarraville, VIC

Usually ready in 4 hours

Formlabs Fuse Blast

Default Title


Fuse Blast delivers 100% hands-off cleaning and polishing for SLS parts

Finished Parts In 15 Minutes

Cleaning routines automatically post-process an entire build chamber in as little as 15 minutes, while the passive filtering reduces media saturation and extends media life to save on overhead costs.

Consistent Results

Pre-programmed routines take out the guesswork for consistent results, while manual mode allows you to adapt to any part requirements.

Professional Parts

Deliver clean-to-the-touch parts thanks to the in-line ionizer that prevents dust and media from re-settling on your parts, or go the extra mile with the optional polishing function* for a smooth, semi-gloss, and dye-ready surface finish.

Streamlined Post-Processing

Fuse Blast seamlessly integrates into the Fuse ecosystem for an automated post-processing workflow that reduces labor time by 80% and delivers finished parts in as little as 15 minutes.


Fuse Blast is a fast, automated solution that delivers professional results, consistently.

  • Hands-off post-processing
  • Passive recycling for extended media life and faster processing on Sift
  • Pre-programmed routines
  • Add-on polishing upgrade*
  • In-line ionizer for clean-to-the-touch parts
  • Dual-function blasting with automatic or manual cleaning
  • Fully sealed and workshop-friendly operation

*Optional add-on, available early 2024.

    Formlabs Fuse Blast Technical Specifications

    Printer Compatibility

    Fuse Series SLS 3D Printers
    Third-party powder bed fusion 3D printers

    Minimum Dimensions for Convenient Access
    (W × D × H)

    145 × 150 × 210 cm
    57.4 × 59.6 × 82.6 in

    (W x D x H)

    100 × 75 × 175 cm
    39 × 29.6 × 68.7 in
    Height when open: 195cm (76.8 in)


    Minimum Access Dimensions
    (W x D x H)

    221.1 x 122.0 x 218.0 cm
    87.1 x 48.0 x 85.8 in


    164 kg (without blasting media)
    360 lb (without blasting media)

    Media Hopper Capacity

    Media hopper capacity 8.3 L, equivalent to 13 kg of 200-300 µm glass media

    Waste Hopper Capacity

    10.6 L

    Operating Environment

    10–36 ºC
    50–96.8 ºF
    Elevation up to 7500 ft / 2286 meters

    Fresh Powder Hopper Capacity

    10.7 kg Nylon 12
    23.6 lb Nylon 12

    Used Powder Hopper Capacity

    9.8 kg Nylon 12
    21.6 lb Nylon 12

    Operating Environment

    18 - 26 °C
    68 - 80 °F
    <30% ambient humidity

    Air Handling

    Negatively pressurized hood with replaceable HEPA filter Independent venting system

    Air Filtration

    Replaceable HEPA medium

    Power Requirements
    (with a vacuum that draws less than 6 A (230 VAC))

    230 VAC, 3 A (no dedicated circuit or vacuum required)

    Compressed Air Requirements

    Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar.
    Regulate pressure input between 90-120 PSI / 6-8 bar.
    Typically achieved by a single 4 HP compressor.


    Wi-Fi (2.4 GHz)
    Ethernet (1000 Mbit)
    USB 2.0

    Ethernet Connectivity

    RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port
    Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.

    Wi-Fi Connectivity

    Protocol: IEEE 802.11 b/g/n
    Frequency: 2.4 / 5.0 GHz
    Supported security: WPA/WPA2

    USB Connectivity

    USB (rev 2.0) C port with a USB A-C or C-C cable

    Sound Emission

    Does not exceed 76.5 dB(A)

    Product Control

    Interactive touchscreen, foot pedals for manual control

    Included Accessories

    Transfer container
    Control pedals
    ESD wrist strap
    7mm socket wrench
    Blast orifice (3mm)
    Blast orifice (4mm)
    T-20 driver
    Floor mat

    Tumbling Basket

    450mm internal diameter
    (Fits a full Fuse build volume)

    Internal work area (W x D x H)

    71 x 55 x 67 cm
    27.9 x 21.6 x 26.3 in

    Accessible work area (W x D x H)

    57 x 50 x 67 cm
    22.4 x 19.6 x 26.4 in
    (basket removed)