Overview For X1 Series/P1 Series/H2D/H2S/P2S The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same...

Product Features ABS Filament RFID chipped Refill (without spool) Tough and Durable Good Heat & Freezing Resistance Comes with High Temperature Reusable Spool Diameter: 1.75mm +/- 0.03mm AMS Compatible Enclosure Printers Required Bambu ABS Bambu ABS is a dependable 3D...

Product Features ABS Filament RFID chipped Refill (without spool) Tough and Durable Good Heat & Freezing Resistance Comes with High Temperature Reusable Spool Diameter: 1.75mm +/- 0.03mm AMS Compatible Enclosure Printers Required   Bambu ABS Bambu ABS is a dependable...

Bambu ABS-GF Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass...

Overview The Air Filter is installed on the inner side of the right inner liner of the printer (closer to the printer chamber) and is used to filter the air inside the chamber, effectively removing VOCs. A removable activated carbon...

Overview The AMS 2 Pro has two active inlet and outlet air vents, with the bottom one as the inlet and the rear one as the outlet. The dampers in the Inlet (side wall) Unit and Outlet (bottom) Unit assemblies...

Overview The AMS 2 Pro Bottom Cover Unit is the bottom shell of the AMS 2 Pro with all sealings pre-installed.   Installation Learn more about the AMS 2 Pro Bottom Cover Unit on Bambu Lab Wiki.   In the Box...

Overview This is the crucial, load-bearing main structural frame for the Bambu AMS 2 Pro. It provides the rigid foundation necessary to hold all internal components, including the filament spools, feeders, and motor mechanisms, in precise alignment.  Installation Learn more...

Overview If you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.If the X1, P1,...

Overview This is the official replacement top cover designed specifically for the Bambu AMS 2 Pro. Its primary function is to seal the unit, which is crucial for maintaining the low-humidity environment necessary to preserve moisture-sensitive filaments. It also protects...

Overview The AMS Internal Hub Unit is specially designed for Bambu AMS. The AMS internal hub unit is used to select particular filaments in AMS and convey filaments from AMS to the printer. It also has the functions of speed measurement...

Overview The AMS Feeder Unit (Hall) is specially designed to support the AMS for printing multiple colors and materials. Each AMS has 4 feeder units, and each feeder unit has its own motor and gears to actively push the filament...