Mitsubishi Chemical DURABIO - Clear (1.75mm 750g)
Pickup available at 7A Kent Street, Yarraville, VIC
Usually ready in 4 hours
7A Kent Street, Yarraville, VIC
7A Kent Street
Yarraville VIC 3013
03 9687 8638
DURABIO by Mitsubishi Chemical
The advantageous properties of PC and PMMA are brought together in this unique DURABIO filament.
It is a bio-based engineering filament with great value as it combines the best of both polymers.
DURABIO is bio-based and outperforms normal PC filaments. Applications that require scratch resistance, hardness,
and have to withstand chemicals are perfect candidates for DURABIO.
This extraordinary 3D printer filament combines most of the advantageous properties of Polycarbonate (PC)
and those of Polymethyl methacrylate(PMMA) into one. DURABIO is a bio-based engineering filament
and is an innovative renewable 3D printing filament with extraordinary properties. DURABIO filament outperforms PC
for 3D printing applications that require properties such as scratch resistance, hardness, and chemical resistance.
Next to that, it allows transparency properties similar to PMMA, but with much higher impact resistance and improved heat resistance.
Therefore, DURABIO closes the gap between PC and PMMA.
Key features DURABIO
- High surface impact strength
- Excellent UV resistance and weathering resistance
- High transparency and optical transmission
- High scratch and abrasion resistance
- Strong, durable and impact resistant
- Chemical inertness
- Optical applications
General printing guidelines DURABIO *
|Nozzle size: ≥ 0.4mm||Layer height: ≥ 0.20mm||Experience level: Beginner|
|Print temp: ± 230 – 250° C||Fan speed: 50%||Drying: ≥5 hours in filament dryer|
|Heat bed: ≥ 100° C||Enclosure needed: No|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.31 g/cc||50 gr coil||0.3 Kg spool||0.75 Kg spool|
|Ø 1.75mm||± 15.9m||± 95m||± 238m|
|Ø 2.85mm||± 6.0m||± 36m||± 90m|
DURABIO product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.