Formfutura ApolloX - Grey (2.85mm 750 gram)
SKU: APOX-285GREY-00750
VENDOR: FormFutura
Pickup available at 7A Kent Street, Yarraville, VIC.
Usually ready in 4 hours if in stock
Formfutura ApolloX - Grey (2.85mm 750 gram)
Default Title
7A Kent Street, Yarraville, VIC
7A Kent Street
Yarraville VIC 3013
Australia
03 9687 8638
Unique features
- Great process stability and filament flowing behaviour
- No-nonsense ABS
- Easy to post-process
- Good physical features
General printing guidelines *
Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
Print temp: ± 245 - 270° C | Print speed: Medium | Retraction: Yes ± 5mm |
Heat bed: ± 90 - 110° C | Fan speed: 0-30% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.03 g/cc | 50 gr coil | 1 Kg spool | 2.3 Kg spool | ||
Ø 1.75mm | ± 20.2m | ± 404m | ± 928m | ||
Ø 2.85mm | ± 7.6m | ± 152m | ± 350m |
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.