Home
Bambu Hotend High Flow - 0.4mm (H2 Series)

Bambu Hotend High Flow - 0.4mm (H2 Series)

Zoom

Out stock

Bambu Hotend High Flow - 0.4mm (H2 Series)

Name: Bambu Hotend High Flow - 0.4mm (H2 Series)
Brand: Bambu Lab
SKU: FAH030
Price: 82.99 AUD
Availability: InStock

Save Up to 30% of Your Time
High-Speed Precision
Quick Swap Nozzle Design

$82.99

Quantity

SKU: FAH030

VENDOR: Bambu Lab

Pickup available at 7A Kent Street, Yarraville, VIC.

Usually ready in 4 hours if in stock

PRODUCT INFORMATION

Real High Flow: Save Up to 30% of Your Time

The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%¹ higher max volumetric speed and reducing print time by up to 30%² with ease. The larger your model, the more time you save—especially for prints with extensive infills.

1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.

	PLA Basic	PLA Matte	PETG HF	Max Volumetric Speed
Bambu Hardened Steel Nozzle (0.4mm)	24 mm³/s	28 mm³/s	24 mm³/s	40 mm³/s
Bambu High Flow Nozzle (0.4mm)	40 mm³/s	48 mm³/s	32 mm³/s	65 mm³/s

High-Speed Precision: Sharp Details Every Time

Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.

Upgrade now and print faster without compromise!

Printer Compatability

H2D	X1/P1 Series	A1 Series
Supported	Not Supported	Supported*

*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.

Filament Compatibility

Filament	0.2 mm Stainless Steel	0.4 mm Hardened Steel	0.6 mm Hardened Steel	0.8 mm Hardened Steel	0.4 mm High Flow Hardened Steel
PLA Basic	√	√	√	√	√
PLA Matte	√	√	√	√	√
PLA Basic Gradient	√	√	√	√	√
PLA Silk+	√	√	Not recommended	Not recommended	√
PLA Silk Dual Color	√	√	Not recommended	Not recommended	√
PLA Silk	√	√	Not recommended	Not recommended	√
PLA Metal	√	√	√	√	√
PLA Marble	Not recommended	√	√	√	√
PLA Sparkle	Not recommended	√	√	√	√
PLA Wood	Not recommended	√	√	√	√
PLA Galaxy	Not recommended	√	√	√	√
PLA Glow	X	√	√	√	√
PLA-CF	X	√	√	√	√
PLA Aero	X	√	Not recommended	Not recommended	√
PETG HF	√	√	√	√	√
PETG Translucent	Not recommended	√	√	√	√
PETG-CF	X	√	√	√	√
ABS	√	√	√	√	√
ABS-GF	X	√	√	√	√
ASA	√	√	√	√	√
ASA Aero	X	√	Not recommended	Not recommended	√
ASA-CF	X	√	√	√	√
PC	√	√	√	√	√
PC FR	√	√	√	√	√
TPU for AMS	X	√	√	√	√
TPU 95A HF	X	√	√	√	√
TPU 85A	X	X	√	√	X
TPU 90A	X	√	√	√	X
PAHT-CF	X	√	√	√	√
PET-CF	X	√	√	√	√(Only for Left Hotend)
PA6-CF	X	√	√	√	√
PPA-CF	X	√	√	√	√(Only for Left Hotend)
PPS-CF	X	√	√	√	√(Only for Left Hotend)
Support for ABS	X	√	√	√	√
Support for PLA/PETG	√	√	√	√	√
Support for PA/PET	X	√	√	√	√
Support for PLA (New Version)	√	√	√	√	√
PVA	X	√	√	√	√
PA6-GF	X	√	√	√	√

[Note]

Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Learn more about filament compatibility on Bambu Lab Wiki.

Quick Swap Nozzle Design

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.

*Learn more about replacing the Hotend on Bambu Lab Wiki

In the Box

High Flow Hotend
High Flow Hotend with hardened steel nozzle - 0.4 mm * 1

Product Specifications

Max. Printing Temp.	350 ℃	Length	49.2 mm
Packaging Weight	0.028 kg	Packaging Size	606030mm

Bambu Hotend High Flow - 0.4mm (H2 Series)