MakerBot Method Tough Slate Grey Filament 0.75kg
Availability: In stock
DURABLE, TOUGH PARTS, OFFICE-FRIENDLY PRINTING
Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness. An added benefit over PLA is its durability, pliability, and machinability which makes it perfect for snap fits and assemblies.
|Heat Deflection (ASTM 648, 66 psi)||125-120°F||52-49°C|
|Flexural Modulus (ASTM D790, 15 mm/min)||377,000 psi||2,600 MPa|
|Tensile Strength at yield (ASTM D638, 50 mm/min)||5,080 psi||35 MPa|
|Tensile Modulus (ASTM D638, 50 mm/min)||406,000 psi||2,800 MPa|
|Strain at Yield - Elongation (%)||>52.7%||>52.7%|
|Notched Impact Strength (ASTM D256)||4.12 ft-lb/in||220 J/m|
Write Your Own Review
We found other products you might like!