Out stock

MakerBot Tough PLA 1.75mm - 0.9Kg - Slate Grey

MakerBot Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness.

$125.00

SKU: MP06997

VENDOR: Makerbot

Pickup available at 7A Kent Street, Yarraville, VIC

Usually ready in 4 hours

MakerBot Tough PLA 1.75mm - 0.9Kg - Slate Grey

Default Title

PRODUCT INFORMATION
PRODUCT INFORMATION

DURABLE, TOUGH PARTS, OFFICE-FRIENDLY PRINTING

MakerBot Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness. An added benefit over PLA is its durability, pliability, and machinability which makes it perfect for snap fits and assemblies.

SUPPORT MATERIAL

  • MakerBot PVA
  • Breakaway Supports

DIMMENSIONAL ACCURACY

  • Finished part dimensional accuracy of ± 0.2mm (± 0.007in)1

TECH SPECS

TECH SPECS Imperial Metric
Heat Deflection (ASTM 648, 66 psi) 125-120°F 52-49°C
Flexural Modulus (ASTM D790, 15 mm/min) 377,000 psi 2,600 MPa
Tensile Strength at yield (ASTM D638, 50 mm/min) 5,080 psi 35 MPa
Tensile Modulus (ASTM D638, 50 mm/min) 406,000 psi 2,800 MPa
Strain at Yield - Elongation (%) >52.7% >52.7%
Notched Impact Strength (ASTM D256) 4.12 ft-lb/in 220 J/m

END-USE PARTS

MakerBot Tough filament was developed not only for its strength and part performance but also to overcome two of the most glaring issues that hamper ABS: warping and curling.

PROTOTYPING

At 2X the impact strength of ABS, MakerBot Tough filament offers superior durability for industrial prototyping and manufacturing aid applications. With tensile and flexural strength that match ABS, designers and engineers can create parts that hold up under all types of stress.