Bambu PLA Aero
SKU: A11-K0-1.75-1000-SPL
VENDOR: Bambu Lab
Pickup available at 7A Kent Street, Yarraville, VIC
Usually ready in 4 hours
Bambu PLA Aero
Black
7A Kent Street, Yarraville, VIC
7A Kent Street
Yarraville VIC 3013
Australia
03 9687 8638
Product Features
- Specialized for 3D RC Planes Printing
- Low Density and Light Weight
- Tough with Good Impact Resistance
- Matte Finish For Easy Coloring
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
- AMS Compatible
- Recommended to dry out before use
Bambu PLA Aero
Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders.
Foaming PLA materials (PLA Aero) have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process.
Low Density and Light Weight
Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%.
* When printing models of the same volume, PLA Aero is about half the weight of PLA Basic.
Controllable Model Density
Achieve lower density of the prints by increasing printing temperature and lowering flow rate.
* The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.
| Parameter Setting | Average Density | |
| Printing Temperature | Increases ↗ | Decreases ↘ |
| Printing Speed | Increases ↗ | Stable or Increases ↗ |
| Flow Rate Ratio | Increases ↗ | Increases ↗ |
| Model Size | Increases ↗ | Decreases ↘ |
| Wall Thickness（Wall loops） | Increases ↗ | Increases ↗ |
| Infill Density | Increases ↗ | Increases ↗ |
Tough with Good Impact Resistance
Compared to pre-foaming Wood PLA, Bambu PLA Aero and its prints are tougher and more resistant to impact, collision, and falling.
Matte Finish For Easy Coloring
Bambu PLA Aero provides an easy-to-color matte surface texture with better dyeing results as compared to PLA Basic.
Parameters Comparison
PLA Basic |
PLA Aero |
|
| Printing Temperature | 190 - 230 ℃ | 210 - 260 ℃ |
| Printing Speed | < 300 mm/s | < 250 mm/s |
| Flow Rate Ratio | 0.96 - 1 | 0.5 - 0.8 |
| Filament Density | 1.24 g/cm³ | 1.21 g/cm³ |
| Foaming Rate | / | 0 - 120% |
| Prints Density | 1.21 g/cm³ | 0.55 - 1.05 g/cm³ |
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | / |
| Hotend | 0.4 mm Nozzle (All type) | 0.6 mm / 0.8mm Nozzle |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Recommended Printing Settings |
Physical Properties |
Mechanical Properties |
|||||
| Drying Settings (Blast Drying Oven) | 55 °C，8 h | Density | 1.21 g/cm³ | Tensile Strength | 26 ± 2 MPa | ||
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) | Vicat Softening Temperature | 56 °C | Breaking Elongation Rate | 2.2 ± 0.8 % | ||
| Nozzle Temperature | 210 - 260 °C | Heat Deflection Temperature | 54 °C | Bending Modulus | 1960 ± 110 MPa | ||
| Bed Temperature (with Glue) | 35 - 45 °C | Melting Temperature | 154 °C | Bending Strength | 42 ± 3 MPa | ||
| Printing Speed | < 250 mm/s | Melt Index | 5.0 ± 0.6 g/10 min | Impact Strength | 24.5 ± 1.7 kJ/m² | ||
Printing Tips
- PLA Aero filament is relatively soft which may result in material loading and unloading failures during AMS printing.
- Drying conditions: 55℃ for 8 hrs. PLA Aero is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:
 |
 |
 |
|
Filament x1 & Desiccant x1 |
Package x1 |
Filament Label x1 |
Related products
SKU: TITX-175BLCK-04500
AVAILABILITY: In stock (10 items)
PRODUCT TYPE: 1.75MM Filament
VENDOR: FormFutura
TitanX is a modified ABS-based 3D printer filament with greatly improved mechanical properties and printability. TitanX is the next generation ABS that 3D prints with high precision and zero warping. TitanX is a high-end engineering filament with ABS (acrylonitrile butadiene...
SKU: PPLA-175SBLK-01000
AVAILABILITY: Out of Stock
PRODUCT TYPE: 1.75MM Filament
VENDOR: FormFutura
Premium PLA is a more pure PLA type of 3D printer filament with higher crystallinity, which makes it the PLA of choice for 3D printing parts with overhangs and for objects where bridging is required. Premium PLA is a high-end...
SKU: A00-W1-1.75-1000-SPL
AVAILABILITY: In stock (0 items)
PRODUCT TYPE:
VENDOR: Bambu Lab
Product Features PLA Filament on RFID chipped Spool Easy to Print & Beginner Friendly Smooth Surface Finish Biodegradable Diameter: 1.75mm +/- 0.03mm AMS Compatible New-user Friendly & Easy to Print Bambu PLA Basic is designed to be extremely user-friendly, making...
SKU: 3DNF0117510
AVAILABILITY: In stock (9 items)
PRODUCT TYPE: 1.75MM Filament
VENDOR: NinjaTek
As the first flexible material on the market, NinjaFlex TPU filament has proprietary technology that boasts a low-tack, easy-to-feed texture ideal for direct-drive extruders. The material has abrasion and chemical resistance and results in consistent printed parts. FEATURES AND BENEFITS...
SKU: APOX-175BLCK-02300
AVAILABILITY: In stock (4 items)
PRODUCT TYPE: 1.75MM Filament
VENDOR: FormFutura
ApolloX by FormFutura is a modified ASA-based filament. This filament is UV- and weather resistant and thus great for outdoor applications. ApolloX combines a high heat resistance with a superb impact strength. ApolloX is an industrial-grade ASA enhanced with five...
